ECOLOGY IS PART OF THE TOTAL VALUE BUILT INTO EACH SPEED-LIFT
- Energy Conservation System requires use of Speed-Lift electric motor only briefly during each cycle while raising the platform (7 seconds up to 50" height).
- More Efficient Receiving and Shipping with Speed-Lifts noticeably reduces vehicle congestion and fuel wasting truck delays particularly at busy locations during peak periods.
- Receiving/Shipping Doors Close Sooner saving A/C, heating and lighting power due to more efficient truck turnarounds.
- Speed-Lifts Do Not Require Regular Oil Changes unless the reservoir oil should become contaminated.
- Minimum Risk Of Contaminating Sewer Systems With Undetected Oil Leak(s) because unlike scissor lifts requiring pits, no sewer or storm water drains or oil separation and dedicated water retention areas are needed with Speed-Lifts.
- No Risk Of Sizable Oil Leak Ground Contamination due to buried hydraulic ram-type cylinder seals leaking, or entire cylinders “blowing out” and immediately dumping 55 or more gallons into the
ground. (Speed-Lift reservoirs hold 10 or 2O gal. and rarely leak even small, easily detected amounts).
- No Catch Basins, Drainage Retention or Spill Oil Recovery Systems are required for Speed-Lifts, because unlike scissor lifts, no lift pits are necessary.
Speed-Lifts are easily checked for oil leaks by visual
examination because all hydraulic components are within view. While leaks are rare, should they occur they will be noticed by most users almost immediately. The Speed-lift is classified as a mobile hydraulic platform docklift. Would ecology like this simplify your business?
|
