NOTE: Truck height wall doors for inside lifts serving outside trucks must have door sills at least 4” below the lowest truck floor to be received in order to allow for the thickness of the Speed-Lift Extended Bridge. If the door sill is too high, the EB will needlessly slope up hill to the platform when serving lower height trucks. The proper wall door sill height should be 45” or 46” above the outside truck approach for serving 50” high trucks.

Lower Opening Bridges (LOB)
Used for locations where the Speed-Lift is positioned 6” or more above the truck approach grade (please specify difference between truck grade approach and level Speed-Lift will be positioned on).

Minimum Opening Bridges (MOB)
Ideal for inside locations where truck heights begin at only 5” or more above Speed-Lift installation floor level (max. lifting height 21”).

Side-Off Platforms (SOP-L or R)
Used where insufficient space exists to come off the end of the Speed-Lift platform. (Indicate L or R by facing the truck approach while on the SOP lift platform).

Lateral Track Mobility (LTM)
Used to serve multiple inside doors, truck approaches, or dropped trailers with one track mounted Speed-Lift (includes 21’ track and electrical power cord festooning, which both require bolting to floor and wall respectively).

Personnel Restraint Bar (PRBCC)
Replaces standard chain with reinforced aluminum bar with cushion cover which must be closed down in the horizontal position for the Speed-Lift platform to raise.

Automated Folding Ramp (AFR)
Replaces chain or restraint bar by mechanically folding a lengthened and reinforced ramp up automatically as the platform is raised.

Dock-To-Ground Hydraulic Lock (DG)
Electric/hydraulic lock prevents unauthorized platform lowering when power is off.

Platform Stops (PLTS)
Mechanical stops to limit platform travel at heights above ground level, as for lift use with curbs, steps, and low docks.

Step Bumper Protectors (SBP)
Heavy-duty steel bumpers welded to the Speed-Lift frame affording maximum protection from step bumpers.

Previous

Table of Contents

Next