SPEED-LIFT MODELS

SL-5000 / SL-6000 / SL-8000 /SL-10000/ SL-12000 / SL-16000 / SL-18000 / SL-21 000 / SL-24000

Speed-Lifts are heavy-duty, high performance parallelogram hydraulic platform lifts which may be used inside, outside, permanently in one location or as mobile units and stored in various areas. Plugging into 208/230 or 460 volt 3 phase AC power with the included power cord, is usually the only installation for a mobile unit operating on level, solid pavement. Four different impact and restraint systems are available as options when it is desirable to mount Speed-Lifts more permanently in one location. Solid or hard electrical wiring in conduit may be used in such fixed installations, yet each system permits the flexibility of moving the Speed-Lift within minutes should needs change.

SPEED-LIFT CUSTOMIZING OPTIONS

E-Z INSTALL INSIDE SL (001)

SL-5001/6001/8001/1000 1/12001/16001/18001/21001/24001
Designed for easy movement into buildings which do not have entrances wide enough to move standard lifts inside, these special Speed-Lifts arrive in two compact parts which can be conveniently assembled inside even in very tight spaces, for use usually with wall doors at truck height equipped with weather seals and truck bumpers mounted on the outside of the reinforced wall.

Extended Bridges (EB)

EB48

For use on SL-5000 and SL-6000 models when bumper posts are used in front of lift, or for other applications where extra bridge length is needed.

EB68

For use on inside SL-5000/5001 and SL-6000/6001 lifts to extend through truck height wall doors/bumper/weather seals and into trucks positioned outside.

EB52

For use on SL-8000 and larger lifts when used with bumper posts positioned in front of the lift, or for other applications where extra bridge length is needed.

EB72

For use on SL-8000/8001 and larger lifts positioned inside, to extend through the thickness of wall doors/bumpers/weather seals and into trucks positioned outside.

Previous

Table of Contents

Next