SPEED-LIFT OPERATION INSTRUCTIONS

WARNING! Read and understand this Speed-Lift Owners Manual BEFORE attempting to use the Speed-Lift, or personal injury may result. If you have questions please call (800) 221-4339 at any time, 24 hours a day. Thank you for making safety your highest priority.

WARNING! All operators must read and become familiar with all caution, warning, danger and information decals. The Speed-Lift is for use by authorized operators only who are over 18 years of age, and who have learned these operating instructions.

Assist truck driver when positioning the truck for loading or unloading.

WARNING! When moving a Speed-Lift, stay clear of wheels and frame, then always crank down stabilization jack pads securely before using the docklift to avoid personal injury.

WARNING! Turn electric power off at the switch or circuit breaker box before plugging in or unplugging the lift with each use, to avoid personal injury from electric shock.

WARNING! USE PERSONNEL RESTRAINT BAR (PRBCC), SAFETY CHAIN (SC), OR AUTOMATED FOLDING RAMP (AFR) WHEN PLATFORM IS ELEVATED TO AVOID PERSONAL INJURY.

WARNING! Operate with caution keeping away from moving parts at all times.

WARNING! Do not leave platform in a raised position. After a shipment or delivery is finished, lower the platform to ground level and turn off the electric power. Do Not Go Under A Raised Platform For Any Reason unless safety blocking precautions to prevent accidental platform lowering have been taken, or personal injury may result. Speed-Lifts may be blocked by placing hardwood or steel blocks under 2 or more cylinder rod ends and lowering the empty platform until the weight of the unit is solidly supported by rod end blocks resting on the Speed-Lift frame. The main control handle may also be "locked out" with a padlock to prevent unauthorized use.

Previous

Table of Contents

Next